Theft and Vandalism Control Measures on Construction Sites

Authors

  • B. M. Arthur-Aidoo Accra Technical University, Accra, Ghana.
  • H. G. Coffie Ho Technical University
  • H. K. Abeka Sunyani Technical University, Ghana.
  • T. Osae-Ansah Accra Technical University, Accra, Ghana.
  • K. Ametsikor Accra Technical University, Accra, Ghana.

DOI:

https://doi.org/10.26437/ajar.v9i2.595

Keywords:

Control. construction sites. security. theft. vandalism

Abstract

Purpose: The goal of this study is to determine and improve the best security practices within Ghanaian construction sites to control theft and vandalism incidents.

Design/Methodology/Approach: A purposive sampling technique was adopted for the population which were indigenous small and medium-sized construction firms of D1KI and D2K2 categories to complete the semi-structured questionnaire. Out of the total of 80 questionnaires distributed, only 65 responses were retrieved for analysis. Descriptive statistics comprising, frequencies and mean scores were used.  

Findings: The findings showed that the most effective and often utilized security measure on construction sites is the hiring of watchmen, with security cameras, alarm systems, and warning signs being the least frequently employed. Sites would most likely be protected from theft by effective implementation of the most important security measures while also guaranteeing that the value for money invested in site security is also realized.

Research Limitation/Implications: The effectiveness of theft and vandalism control measures may vary based on specific site characteristics, such as location, size, and type of construction. Generalising findings from one site to all construction contexts may not be applicable.

Social Implication: Incidents of theft and vandalism can lead to social tensions within the community, especially if residents perceive construction activities as a source of risk. Effective control measures mitigate these tensions, fostering a more harmonious relationship between construction companies and the local population.

Practical Implication: Minimizing the impact of theft and vandalism contributes to the timely completion of construction projects. Unanticipated delays due to security incidents can be avoided, ensuring that projects adhere to planned schedules and deadlines.

Originality/ Value: The originality of this paper lies in its targeted investigation into theft and vandalism control measures on small and medium-sized construction sites, offering innovative and contextually relevant solutions that address the unique challenges faced by SMEs in the construction industry.

Author Biographies

B. M. Arthur-Aidoo, Accra Technical University, Accra, Ghana.

He is a Senior Lecturer at the Department of Building Technology, Faculty of Built Environment, Accra Technical University

H. G. Coffie, Ho Technical University

He is a Senior Lecturer at the Department of Building Technology, Faculty of Built Environment, Ho Technical University, Ho, Volta Region Ghana.

H. K. Abeka, Sunyani Technical University, Ghana.

He is a Lecturer at the Department of Civil Engineering, Faculty of Engineering, Sunyani Technical University.  

T. Osae-Ansah, Accra Technical University, Accra, Ghana.

He is a student at the Department of Building Technology, Faculty of Built Environment, Accra Technical University.

K. Ametsikor, Accra Technical University, Accra, Ghana.

He is a student at the Department of Building Technology, Faculty of Built Environment, Accra Technical University.

References

Abdelhamid, T. S., & Everett, J. G. (2000). Identifying effective security measures for construction sites. Journal of construction engineering and management, 126(5), 366-373.

Ablordeppey, E. E., Moo, F., Akortsu, W., & Mustapha, A. (2020). Minimizing theft on construction sites in Ghana: the perspective of contractors in the upper west region of Ghana. Civil and Environmental Research, 2(2), 24-57.

Abu, S., Abudi, A., & Bukari, M. (2019). Behavioural influences on construction materials waste management in the construction industry: A study of construction firms in Ghana. Journal of Emerging Trends in Economics and Management Sciences, 10(2), 78-89.

Albert, I., Shakantu, W., & Ibrahim, S. (2021). The effect of poor materials management in the construction industry: a case study of Abuja, Nigeria. Acta Structilia, 28(1), 142-167.

Arijeloye, B. T. (2023). Impact of project risk allocation on PPP housing project delivery in Nigeria: partial least square structural equation modeling approach. Journal of Engineering, Design and Technology.

Bajjou, M. S., & Chafi, A. (2020). Identifying and managing critical waste factors for lean construction projects. Engineering Management Journal, 32(1), 2-13.

Bamfo-Agyei, E., Thwala, D. W., & Aigbavboa, C. (2023). Optimisation of labourintensive productivity for construction projects in Ghana. Acta Structilia, 30(1), 122-154.

Bamfo-Agyei, E., Thwala, D. W., & Aigbavboa, C. (2021). Beneficiaries’ Knowledge of Tools in Achieving Productivity of Labour-Intensive Work In Ghana. African Journal of Applied Research, 7(2), 176-193.

Berg, R. & Hinze, J. (2005). Theft and vandalism on construction sites. Journal of Construction Engineering and Management, 131, (7), 826-833.

Botchway, E. A., Agyekum, K., Pittri, H., & Lamina, A. (2023). Deployment of physical access control (PAC) devices in university settings in Ghana. Frontiers in Engineering and Built Environment.

Bryman, A. (2016). Social research methods. Oxford University Press.

Chen, W., Huang, X., & Huang, T. (2020). An intelligent security monitoring system for construction sites based on big data. Automation in Construction, 114, 103140.

Cheng, J. P., Wong, P. K. Y., Luo, H., Wang, M., & Leung, P. H. (2022). Vision-based monitoring of site safety compliance based on worker re-identification and personal protective equipment classification. Automation in Construction, 139, 104312.

Creswell, J. W. (2014). Research design: Qualitative, quantitative, and mixed methods approach. Sage Publications.

Edike, U. E., & Babatunde, A. (2017). Crime management on construction site: A study of Ogun State, Nigeria. Covenant Journal of Research in the Built Environment.

Ellis, J., Edwards, D. J., Thwala, W. D., Ejohwomu, O., Ameyaw, E. E., & Shelbourn, M. (2021). A case study of a negotiated tender within a small-to-medium construction contractor: modelling project cost variance. Buildings, 11(6), 260.

Farinloye, O., Odusami, K., & Adewunmi, Y. (2013). Theft and Vandalism Control Measures on Building Sites in Lagos, Nigeria. Journal of Engineering, Project & Production Management, 3(1).

Fitriani, R., Latief, Y., & Marhayudi, P. (2022). The Security Cost as Part of Construction Safety Cost: Case Study of Flats Construction. International Journal of Safety and Security Engineering, 12(1), 47-53.

Fotios, S. A., Robbins, C. J., & Farrall, S. (2021). The effect of lighting on crime counts. Energies, 14(14), 4099.

Goncalves, D. P. (2023). Security access control effectiveness design. South African Journal of Industrial Engineering, 34(3), 84-96.

Gupta, S., Jha, K. N., & Vyas, G. (2022). Construction and demolition waste causative factors in building projects: survey of the Indian construction industry experiences. International Journal of Construction Management, 1-11.

Goh, Y. M., & Liang, X. (2016). A Study on the Implementation of Security Measures in Construction Sites in Singapore. Journal of Construction Engineering and Management, 142(10), 04016046.

Haas, O., Huschbeck, T., & Markovič, P. (2022). Effects of Theft on the Critical Path of Construction Projects. In Developments in Information & Knowledge Management for Business Applications: Volume 4 (pp. 59-78). Cham: Springer International Publishing.

Han, S., Fang, Y., Zhang, Y., & He, Y. (2021). On-site safety management of construction projects using a security access control system. Journal of Intelligent & Fuzzy Systems, 41(2), 2855-2867.

Hossain, J., Kadir, A. F., Hanafi, A. N., Shareef, H., Khatib, T., Baharin, K. A., & Sulaima, M. F. (2023). A Review on Optimal Energy Management in Commercial Buildings. Energies, 16(4), 1609.

Kim, T. (2019). Facilitating police reform: Body cameras, use of force, and law enforcement outcomes. Use of Force, and Law Enforcement Outcomes (October 23, 2019).

Lee, Y. C., Shariatfar, M., Rashidi, A., & Lee, H. W. (2020). Evidence-driven sound detection for prenotification and identification of construction safety hazards and accidents. Automation in Construction, 113, 103127.

Lu, Y., & Yu, J. (2019). Survey on security measures in Chinese construction projects. Journal of Construction Engineering and Management, 145(2), 04018120.

Navaratnam, S., Satheeskumar, A., Zhang, G., Nguyen, K., Venkatesan, S., & Poologanathan, K. (2022). The challenges confronting the growth of sustainable prefabricated building construction in Australia: Construction industry views. Journal of Building Engineering, 48, 103935.

Ocran, J. (2019, July 19). Thieves, vandals target construction sites. Ghanaian Times. Retrieved from https://www.ghanaiantimes.com.gh/thieves-vandals-target-construction-sites/

Oke, A. E., Kineber, A. F., Akindele, O., & Ekundayo, D. (2023). Determining the Stationary Barriers to the implementation of Radio Frequency Identification (RFID) technology in an emerging construction industry. Journal of Engineering, Design and Technology.

Oswald, D., Ahiaga-Dagbui, D. D., Sherratt, F., & Smith, S. D. (2020). An industry structured for unsafety? An exploration of the cost-safety conundrum in construction project delivery. Safety science, 122, 104535.

Post, K. K., & Jack, C. (2021). Building Bear Fences for Your Apiary: ENY-2060/IN1318, 3/2021. EDIS, 2021(2), 6-6.

Rey-Merchán, M. D. C., Gómez-de-Gabriel, J. M., López-Arquillos, A., & Fernández-Madrigal, J. A. (2021). Virtual fence system based on IoT paradigm to prevent occupational accidents in the construction sector. International journal of environmental research and public health, 18(13), 6839.

Simpeh, F., Bamfo-Agyei, E., & Amoah, C. (2022). Barriers to the implementation of COVID-19 safety regulations: insight from Ghanaian construction sites. Journal of Engineering, Design and Technology, 20(1), 47-65.

Simpeh, F., Mavangwa, G. M., & Wentzel, L. (2022). Strategies to overcome barriers to public facilities management. Property Management.

Simukonda, W., & Kamwela, N. (2021). The Management of Theft and Vandalism on Construction Jobsites in the Southern Region of Malawi. Journal of Construction Business and Management, 5(1), 47-59.

van den Berg, M., Voordijk, H., & Adriaanse, A. (2021). BIM uses for deconstruction: An activity-theoretical perspective on reorganising end-of-life practices. Construction management and economics, 39(4), 323-339.

Wang, X., & Li, Y. (2018). Construction site security management based on human-computer interaction technology. Journal of Intelligent and Fuzzy Systems, 35(6), 7005

Yates, D., Bērziņa, D., & Wright, A. (2022). Protecting a broken window: Vandalism and security

at rural rock art sites. The Professional Geographer, 74(2), 384-390.

Yılmaz, M., & Kanıt, R. (2018). A practical tool for estimating compulsory OHS costs of

residential building construction projects in Turkey. Safety Science, 101, 326-331.

Yu, Y., Li, Q., Lin, X., & Liu, M. (2019). Investigation and analysis of construction site safety

accidents based on access control systems. Advances in Civil Engineering, 2019

Zhang, W., & Huang, Q. (2018). Analysis on the causes and prevention measures of theft in construction sites. Journal of Physics: Conference Series, 1065(4), 042030.

Downloads

Published

2024-01-04

How to Cite

Arthur-Aidoo, B. M., Coffie, H. G., Abeka, H. K., Osae-Ansah, T., & Ametsikor, K. (2024). Theft and Vandalism Control Measures on Construction Sites. AFRICAN JOURNAL OF APPLIED RESEARCH, 9(2), 284–301. https://doi.org/10.26437/ajar.v9i2.595