Ghanaian Construction Workers’ Health and Safety Knowledge and Compliance
DOI:
https://doi.org/10.26437/ajar.v10i1.676Keywords:
Compliance. construction workers. health and safety. knowledge. productivity.Abstract
Purpose: This study seeks to assess the knowledge level of local construction workers regarding health and safety measures on construction sites.
Design/Methodology/Approach: A quantitative research approach was employed, using interval Likert-type scales to measure data. A purposive sampling technique was employed for the study. One hundred and fifty questionnaires were distributed, with 122 returned and deemed valid for analysis. Descriptive statistics, relative importance index, Pearson Correlation, and structural equation modelling were utilised for the study. Data analysis was conducted using Amos 28 through structural equation modelling.
Findings: The results indicate that the level of knowledge in construction health and safety practices directly and indirectly affects project performance and productivity. Higher levels of knowledge were associated with higher compliance with construction health and safety practices, leading to increased project performance and productivity. Compliance with health and safety measures directly influenced project performance and productivity. Additionally, the level of knowledge had a positive indirect effect on project performance and productivity.
Research Limitations: Primarily, the sample was confined to construction workers within specific regions of Ghana, which may limit the applicability of the results to other geographic areas or contexts. Additionally, using self-reported data through questionnaires could introduce bias, as participants may respond in ways they perceive as socially desirable rather than reflecting true behaviours and knowledge levels.
Practical Implication: Construction firms and authorities should prioritise safety training and tight safety regulations. Knowledge and compliance boost project performance and efficiency, making them a compelling financial case for investment. Companies could integrate advanced training modules and ongoing learning opportunities to maintain safety knowledge and compliance leading to more efficient and safer construction methods.
Social Implications: The study shows substantial social consequences for construction worker health and safety. It emphasises the need for improved education, regulation, and compliance to reduce workplace injuries and fatalities.
Originality/value: It contributes to understanding the relationship between project performance and productivity in a complex construction environment.
References
Adebiyi, R. T., Babalola, O., Amuda-Yusuf, G., Olowa, T. O., Rasheed, S. A., & Zubair, M. A. (2019). Level of adherence to health and safety regulations on construction sites in Nigeria. Proceedings of the 4th Nigerian Institute of Quantity Surveyors Research Conference, 10th – 12th September 2019, Enugu State University of Science and Technology, Enugu State, Nigeria.
Adebiyi, R. T., Olubola, R., Babalola, G., Amuda-Yusuf, S., Rasheed, T. O., & Olowa, O. (2020). Effect of knowledge and compliance of health and safety information on construction site workers’ safety in Nigeria. International Journal of Safety and Security Engineering, 10(2), 269–277.
Agwu, M. O. (2012). Total safety management: A strategy for improving organizational performance in selected construction companies in Nigeria. International Journal of Business and Social Science, 3(20), 210–217.
Aksorn, T., & Hadikusumo, B. H. W. (2008). Critical success factors influencing safety program performance in Thai construction projects. Safety Science, 46(4), 709–727.
Alvi, M. H. (2016). A manual for selecting sampling techniques in research. Karachi, Pakistan: University of Karachi & Iqra University.
Annan, J.-S., Addai, E. K., & Tulashie, S. K. (2015). A call for action to improve occupational health and safety in Ghana and a critical look at the existing legal requirement and legislation. Safety and Health at Work, 6(2), 146–150.
Arifuddin, R., Suraji, A., & Latief, Y. (2019). Study of the causal factors of construction projects' vulnerability to accidents. International Journal of Innovative Technology and Exploring Engineering, 8(6), 711–716..
Bottani, E., Monica, L., & Vignali, G. (2009). Safety management systems: Performance differences between adopters and non-adopters. Safety Science, 47(2), 155–162.
Brown, J. D. (2011). Likert items and scales of measurement? JAL Testing & Evaluation SIG Newsletter, 15(1), 10–14.
Casey, T., Griffin, M. A., Flatau Harrison, H., & Neal, A. (2017). Safety climate and culture: Integrating psychological and systems perspectives. Journal of occupational health psychology, 22(3), 341.
Clarke, S. (2006). The relationship between safety climate and safety performance: A meta-analytic review. Journal of Occupational Health Psychology, 11, 315-327.
Creswell, J. W. (2014). Research design: Qualitative, quantitative, and mixed methods approaches (4th ed.). Thousand Oaks, CA: Sage.
Dahl, Ø. (2013). Safety compliance in a highly regulated environment: A case study of workers’ knowledge of rules and procedures within the petroleum industry. Safety Science, 60, 185-195.
Demirkesen, S. (2020). Measuring impact of Lean implementation on construction safety performance: a structural equation model. Production Planning & Control, 31(5), 412-433.
Earnest, G. S., & Branche, C. M. (2016). Knowledge gaps and emerging issues for fall control in construction. Fall prevention and protection, 487-508.
Fang, D. P., Xie, F., Huang, X. Y., & Li, H. (2004). Factor analysis-based studies on construction workplace safety management in China. International Journal of Project Management, 22(1), 43–49.
Fernández-Muñiz, B., Montes-Peón, J. M., & Vázquez-Ordás, C. J. (2009). Relation between occupational safety management and firm performance. Safety Science, 47(2), 155–162. http://dx.doi.org/10.1016/j.ssci.2008.10.022.
Fernández-Muñiz, B., Montes-Peón, J. M., & Vázquez-Ordás, C. J. (2014). Safety leadership, risk management, and safety performance in Spanish firms. Safety Science, 70, 295–307. http://dx.doi.org/10.1016/j.ssci.2014.07.010.
Fogarty, G. J., & Shaw, A. (2010). Safety climate and the Theory of Planned Behaviour: Towards the prediction of unsafe behaviour. Accident Analysis & Prevention, 42, 1455–1459.
Ghana Statistical Service (GSS). (2023). Quarterly Gross Domestic Product (QGDP) Third. April 2024. Retrieved from
Hallowell, M. (2010). Cost-effectiveness of construction safety programme elements. Construction Management and Economics, 28(1), 25–34. https://doi.org/10.1080/01446190903460706
Hallowell, M. R. (2011). Risk-based framework for safety investment in construction organizations. Journal of Construction Engineering and Management, 137(8), 592–599.
Hallowell, M. R., & Calhoun, M. E. (2011). Interrelationships among highly effective construction injury prevention strategies. Journal of Construction Engineering and Management, 137(11), 985–993.
Hallowell, M. R., & Gambatese, J. A. (2009). Construction safety risk mitigation. Journal of Construction Engineering and Management, 135(12), 1316–1323.
Hallowell, M. R., Hinze, J. W., Baud, K. C., & Wehle, A. (2013). Proactive construction safety control: Measuring, monitoring, and responding to safety leading indicators. Journal of Construction Engineering and Management, 139(10), 04013010.
Hasan, A., & Jha, K. N. (2013). Safety incentive and penalty provisions in Indian construction projects and their impact on safety performance. International Journal of Injury Control and Safety Promotion, 20(1), 3–12.
Hinze, J., & Gambatese, J. (2003). Factors that influence safety performance of specialty contractors. Journal of Construction Engineering and Management, 129(2), 159–164.
Hopkins, A. (2011). Risk-management and rule-compliance: Decision-making in hazardous industries. Safety Science, 49(2), 110-120.
Jitwasinkul, B., & Hadikusumo, B. H. (2011). Identification of important organisational factors influencing safety work behaviours in construction projects. Journal of Civil Engineering and Management, 17(4), 520–528.
Kawuwa, A. S., Adamu, M. A., Shehu, A., & Abubakar, I. M. (2018). Health and safety challenges on construction sites of Bauchi Metropolis. International Journal of Scientific and Research Publications, 8(1), 367-377.
Kheni, N. A., Adzraku, W. D., & Boateng, C. (2018). Improving Health and Safety Performance in Low- and Lower-Middle-Income Countries: The Role of Site Managers in Ghana. Journal of Construction, 1, 14-24.
Kheni, N. A., Gibb, A. G. F., & Dainty, A. R. J. (2010). Health and safety management within small and medium-sized enterprises (SMEs) in developing countries: Study of contextual influences. Journal of Construction Engineering and Management, 136(10), 1104-1115.
Li, C. H., & Li, H. M. (2009). Developing a model to evaluate the safety management performance of construction projects. In Management and Service Science, 2009. MASS'09. International Conference on. IEEE, 1–5.
Liu, S., Nkrumah, E. N. K., Akoto, L. S., Gyabeng, E., & Nkrumah, E. (2020). The state of occupational health and safety management frameworks (OHSMF) and occupational injuries and accidents in the Ghanaian oil and gas industry: Assessing the mediating role of safety knowledge. BioMed research international, 2020(1), 6354895.
MD, D., & Mahesh, G. (2023). A framework for enhancing construction safety through knowledge-based safety culture indicators. International Journal of Construction Management, 23(12), 2039-2047
Mullen, J., Kelloway, E. K., & Teed, M. (2017). Employer safety obligations, transformational leadership and their interactive effects on employee safety performance. Safety Science, 91, 405-412.
Mustaffa, S. A. (2021). Compliance on Safety Behaviour among the Lift Maintenance Workers (Doctoral dissertation, University of Malaya (Malaysia)).
Mwangi, F. N. (2016). An investigation of the causes of accidents and health hazards on construction sites and their management in Kenya (Case study of Nairobi County) (Doctoral dissertation, University of Nairobi).
Netemeyer, R. G., Bearden, W. O., & Sharma, S. (2003). Scaling procedures: Issues and applications. Thousand Oaks, CA: Sage. https://doi.org/10.4135/9781412985772
Okoye, P. U., Ezeokonkwo, J. U., & Ezeokoli, F. O. (2016). Building construction workers’ health and safety knowledge and compliance on site. Journal of Safety Engineering, 5(1), 17–26.
Okoye, P. U., Okolie, K. C., & Ngwu, C. (2017). Multilevel safety intervention implementation strategies for Nigeria's construction industry. Journal of Construction Engineering, 6(2), 1-14.
Omran, A., Omran, A., & Kadir, A. H. P. (2010). Critical success factors that influencing safety program performance in Malaysian construction projects: Case studies. Journal of Academy Research in Economics, 2(1).
Pouliakas, K., & Theodossiou, I. (2013). The economics of health and safety at work: An interdisciplinary review of the theory and policy. Journal of Economic Surveys, 27(1), 167-208.
Provan, D. J., Woods, D. D., Dekker, S. W., & Rae, A. J. (2020). Safety II professionals: How resilience engineering can transform safety practice. Reliability Engineering & System Safety, 195, 106740.
Scholar, A. (2020). The Relevance of Human Capacity Development towards Sustainable Health, Safety and Environmental Management
Tam, C. M., Zeng, S. X., & Deng, Z. M. (2004). Identifying elements of poor construction safety management in China. Safety Science, 42(7), 569–586.
Tam, V. W., & Fung, I. W. (2012). Behavior, attitude, and perception toward safety culture from mandatory safety training course. Journal of Professional Issues in Engineering Education and Practice, 138(3), 207–213.
Udo, E. O., Zuithoff, N. P., van Hemel, N. M., de Cock, C. C., Hendriks, T., Doevendans, P. A., & Moons, K. G. (2012). Incidence and predictors of short- and long-term complications in pacemaker therapy: the FOLLOWPACE study. Heart Rhythm, 9(5), 728-735.
Umeokafor, N. I., Isaac, D., Jones, K. G., & Umeadi, B. (2014). Enforcement of occupational safety and health regulations in Nigeria: An exploration. European Scientific Journal, Special Edition, 3, 93-104.
Usukhbayar, R., & Choi, J. (2020). Critical safety factors influencing the safety performance of construction projects in Mongolia. Journal of Asian Architecture and Building Engineering, 19(6), 600-612.
Venkataraman, N. (2008). Safety performance factor. International Journal of Occupational Safety and Ergonomics, 14(3), 327–331.
Vinodkumar, M. N., & Bhasi, M. (2010). Safety management practices and safety behaviour: Assessing the mediating role of safety knowledge and motivation. Accident Analysis & Prevention, 42, 2082–2093.
Williams, O. S., Hamid, R. A., & Misnan, M. S. (2018). Accident causal factors on the building construction sites: A review. International Journal of Built Environment and Sustainability, 5(1), 78-92. https://doi.org/10.11113/ijbes.v5.n1.248
Ye, X., Ren, S., Li, X., & Wang, Z. (2020). The mediating role of psychological capital between perceived management commitment and safety behaviour. Journal of Safety Research, 72, 29-40. (Neal et al., 2000).
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2024 AFRICAN JOURNAL OF APPLIED RESEARCH
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
By submitting and publishing your articles in the African Journal of Applied Research, you agree to transfer the copyright of the Article from the authors to the Journal ( African Journal of Applied Research).
