Application of Bamboo Products for Green Interior

Authors

  • I. Agyei-Boakye Accra Technical University, Accra, Ghana
  • K. Fiati Accra Technical University, Accra, Ghana.
  • D. N. Dzivor Accra Technical University, Accra, Ghana.
  • N. J. Lawer Accra Technical University, Accra, Ghana.

DOI:

https://doi.org/10.26437/ajar.v10i2.817

Keywords:

Bamboo. eco-design. eco-friendly. green. interior space

Abstract

Purpose: Bamboo is not widely accepted in Ghanaian society, as most people frown at its products and do not know the abundant eco-friendly aesthetic products obtained from it. The research aims to investigate the comprehensive application of bamboo products in green interior design, focusing on sustainability.

Design/Methodology/Approach: This study employed a cross-sectional research design to investigate the sustainability and marketability of bamboo and bio-based products in the interior design sector. A convenient sampling technique was used to collect data using a structured questionnaire developed specifically for this study to gather information on the demographic profile of artisans, the quality and use of bamboo products, levels of patronage, and competition with imported goods.

Findings: Innovative strategies, including eco-design, product life extension, and sustainable materials utilisation, have been identified as important factors in defining the contributions that bamboo products can make to broadening the sources of materials needed in the interior.

Research Limitation: Research confined to specific climate zones. Limited long-term performance data for bamboo products in interior applications.

Practical Implication: Advocacy for the patronage of more bamboo products leads to carbon sequestration, a means of achieving net zero (of carbon emissions) by 2050, the worldwide dream. This will result in low carbon emissions and reduced global warming and its antecedence.

Social Implication: Exposure of bamboo products to consumers enhances the marketability of the products, leading to more job creation, financial enhancement, and improved livelihood. Policymakers will, therefore, have to devise a strategy to ensure the continual supply of raw materials that will not endanger the ecosystem. Establishing bamboo plantations will result in re-afforestation, and marketing the harvested bamboo will eliminate rural poverty. This will lead to the achievement of the SDG 1.

Originality/ Value: This study aims to enhance the patronage of our Indigenous bio-based handicraft products from bamboo by architects and interior designers to curtail our carbon footprints through enhanced carbon sequestration.  

Author Biographies

I. Agyei-Boakye, Accra Technical University, Accra, Ghana

Isaac Agyei-Boakye is a Senior Lecturer at the Department of Interior Design and Upholstery Technology (IDUT), Accra Technical University, Accra, Ghana.

K. Fiati, Accra Technical University, Accra, Ghana.

Kenneth Fiati is a Lecturer at the Department of Interior Design and Upholstery Technology (IDUT), Accra Technical University, Accra, Ghana.

D. N. Dzivor, Accra Technical University, Accra, Ghana.

Dr. Nelson Doe Dzivor is a Senior Lecturer at the Department of Applied Mathematics & Statistics, Accra Technical University, Accra, Ghana.

N. J. Lawer, Accra Technical University, Accra, Ghana.

John Narh Lawer is a  Lecturer at the Department of Interior Design and Upholstery Technology (IDUT), Accra Technical University, Accra, Ghana.

References

Acquah, A., Agyabeng, A. N., & Mensah, J. K. (2024). Digital Transformation and Implications

for the Informal Sector of Ghana. In Informal Economy and Sustainable Development Goals: Ideas, Interventions and Challenges (pp. 29-51). Emerald Publishing Limited.

Akinlabi, E. T., Anane-Fenin, K., & Akwada, D. R. (2017). Bamboo. The Multipurpose Plant,

Akua-Sakyiwah, B. (2020). Intersecting social structures and human actors: Ganfoso refugees’

settling experiences and impact on children’s education. Comparative Migration Studies, 8(1), 43.

Amjad, A. I. (2024). Bamboo fibre: a sustainable solution for textile manufacturing. Advances in

Bamboo Science, 100088.

Anjum, F., Zia, M. K., & Masood, A. (2023). Gender inclusivity in traditional crafts: A case study of women artisans. Journal of Gender Studies, 32(2), 123-139. https://doi.org/10.1080/09589236.2023.XXXXXX Retrieved on 28/09/20224.

Ayer, S., Timilsina, S., Aryal, A., Acharya, A. K., Neupane, A., & Bhatta, K. P. (2023). Bamboo

forests in Nepal: status, distribution, research trends and contribution to local livelihoods. Advances in Bamboo Science, 4, 100027.

Azam, F., Ahmad, F., Ahmad, S., & Haji, A. D. (2023). Sustainable raw materials. In Circularity

in Textiles (pp. 59-128). Cham: Springer Nature Switzerland.

Ebanyenle, E., & Oteng-Amoako, A. A. (2007). Site differences in morphological and physical

properties of Bambusa vulgaris grown in Ghana. Discovery and Innovation, 19(3), 222-225.

Forestry Commission. (2016). Ghana’s Forest Plantation Strategy : 2016 – 2040. Retrieved on

/09/2024.

Guinness World Record Limited, 2024. Recorded in U. K ( Bamboo Plant).Retrieved on

/09/2024.

Han, S., Chen, F., Yu, Y., Chen, L., & Wang, G. (2023). Bamboo-inspired Strong, Tough and

Stable composites derived from renewable bamboo. Industrial Crops and Products, 194,

https://doi.org/10.1016/j.indcrop.2023.116292

Hearn, E.J. (1997). Mechanics of materials. An introduction to the mechanics of elastic and plastic

deformation of solids and structural materials (Third edition). University of Warwick, U.K. Butterworth, Heinemann.

International Bamboo and Rattan Organisation (INBAR). (2023). Ending poverty with bamboo & rattan. Bamboo & Rattan Update, 5(1). Retrieved on 20/09/2024.

International Bamboo and Rattan Organisation (INBAR), Working Paper, (2020). IFAD-RMSC-

FC of Ghana; www.inbar.mt Retrieved on 29/09/2024

IPCC 2007 REPORT; AR4 Climate Change 2007: Impacts, Adaptation, and Vulnerability.

Retrieved on 26/12/2024.

Janssen, J. (2000) Designing and Building with Bamboo. INBAR Technical Report No. 20.

Kumar, S., Singh, R., & Gupta, A. (2022). The role of local artisans in sustainable development: Challenges and opportunities. Journal of Sustainable Development, 15(1), 45-59. https://doi.org/10.5539/jsd.v15n1p45

Liese, W. (2009) Bamboo as Carbon-Sink – Fact or Fiction? Journal of Bamboo and Rattan 8:

-114.

Lobovikov, M., Paudels, S., Piazza, M., Ren, H., & Wu, J. (2009). World bamboo resources: A thematic study prepared in the global forest resources assessment 2005 framework. Food and Agriculture Organisation (FAO).

Lou, Z., Zheng, Z., Yan, N., Jiang, X., Zhang, X., Chen, S., ... & Xu, L. (2023). Modification and application of bamboo-based materials: A review—Part II: Application of bamboo-based materials. Forests, 14(11), 2266. https://doi.org/10.3390/f14112266

Mohmod, A. L., Amin, A. H., Kasim, J., & Jusuh, M. Z. (1993). Effects of anatomical

characteristics on the physical and mechanical properties of Bambusa blumeana. Journal of Tropical Forest Science, 159-170.

Molari, L., & García, J. J. (2021). On the radial variation of the transverse mechanical properties

of bamboo. Journal of Building Engineering, 33, 101557.

Opoku, D., Hackman, J. K., Ayarkwa, J., & Agyekum, K. (2015). Assessing areas and trends of

bamboo usage in building construction in Ghana. African Journal of Applied Research, 1(1).

Peprah, T., Essien, C., Owusu-Afriyie, K., & Foli, E. G. (2014). Exploring the use of bamboo for accelerated reclamation of degraded mined sites in Ghana. Journal of Bamboo and Rattan, 13(3&4), 55-66. https://doi.org/10.1163/15693462-12341234

Sattar, M. A., Kabir, M. F., & Bhattacharjee, D. K. (1990). Effect of age and height position of

muli (Melocanna baccifera) and borak (Bambusa balcooa) bamboos on their physical and mechanical properties.

Singnar, P., Nath, A. J., & Das, A. K. (2017). Biomass and carbon stock of village bamboos in the homegardens of Barak Valley, Northeast India. Tropical Ecology, 58(3), 435-443. https://doi.org/10.1007/s42965-017-0003-4

Skoczinski, P., Carus, M., Tweddle, G., Ruiz, P., de Guzman, D., Ravenstijn, J., ... & Raschka, A. (2023). Bio-based building blocks and polymers: Global capacities, production and trends 2022–2027. Industrial Biotechnology, 19(4), 185-194. https://doi.org/10.1089/ind.2022.0036

Solomon, T., Moon, H., Abebe, S., Minale, A. S., & Teketay, D. (2020). Promoting bamboo-based

agroforestry for enhancing ecosystem services from degraded lands. Agroforestry for Degraded Landscapes: Recent Advances and Emerging Challenges-Vol. 2, 423-444.

SPRIG, Pacific Islands Forests and Trees. (1999). Bamboo and rattan processing and craft training.

Retrieved on 21/09/2024.

Stern, N. (2008). The economics of climate change. American Economic Review, 98(2), 1-37.

Sun, Y., & Li, Q. M. (2018). Dynamic compressive behaviour of cellular materials: A review of

phenomenon, mechanism and modelling. International Journal of Impact Engineering, 112, 74-115.

Tekpetey, S. L. (2011). Bamboo Resources in Ghana: Diversity, Properties, Products and

Opportunities. (In book). ISBN : ISBN 9789988-1-6269-6.

Wang, J., & Azam, W. (2024). Natural resource scarcity, fossil fuel energy consumption, and total

greenhouse gas emissions in top emitting countries. Geoscience Frontiers, 15(2), 101757.

Xie, Y., Gao, S., Zhang, D., Wang, C., & Chu, F. (2023). Bio-based polymeric materials synthesized from renewable resources: A mini-review. Resources, Chemicals and Materials, 2(3), 223-230. https://doi.org/10.1016/j.rscm.2023.100018

Yuen, J. Q., Fung, T., & Ziegler, A. D. (2017). Carbon stocks in bamboo ecosystems worldwide:

Estimates and uncertainties. Forest Ecology and Management, 393, 113-138.

Downloads

Published

2024-12-31

How to Cite

Agyei-Boakye, I., Fiati, K. ., Dzivor, D. N., & Lawer, N. J. . (2024). Application of Bamboo Products for Green Interior. AFRICAN JOURNAL OF APPLIED RESEARCH, 10(2), 408–428. https://doi.org/10.26437/ajar.v10i2.817