Design of Solar Stove with Heat Storing Material Using PV Cells

Authors

  • M. A. Kumbhalkar JSPM Narhe Technical Campus, Pune, Maharashtra, India.
  • S. A. Choudhari JSPM Narhe Technical Campus, Pune, Maharashtra, India
  • M. M. Sardeshmukh JSPM Narhe Technical Campus, Pune, Maharashtra, India
  • D. V. Bhise JSPM University, Pune, Maharashtra, India
  • S. S. Nehe Samarth College of Engineering and Management, Belhe, Maharashtra, India
  • V. R. Doifode

DOI:

https://doi.org/10.26437/ajar.v11i1.856

Keywords:

Heating coil. photovoltaic cells. solar stove. storage. sustainable

Abstract

Purpose: This study aims to develop a cost-effective and environmentally sustainable solar cooking solution for urban and rural populations in developing nations, where the majority rely on non-commercial sources of cooking energy.

Design/Methodology/Approach: The research involves designing a solar stove incorporating a thermal battery, heat-storing materials, and a photovoltaic system. Experimental trials were conducted to determine the melting points and density of different heat-storing materials: potassium nitrate, sodium nitrate, and their combination.

Findings: The experimental results indicate that a potassium and sodium nitrate mixture provides superior heat storage and release performance compared to the individual components. This combination shows promise for maintaining the necessary temperatures for cooking even in the absence of direct sunlight.

Research Limitation: The study is limited to specific heat-storing materials and laboratory-scale experiments, which may differ from real-world conditions.

Practical Implication: It could be especially beneficial for off-grid and rural areas in developing countries where traditional fuel sources are scarce or costly.

Social Implication: This research offers a renewable energy-based cooking method, improving energy accessibility, health, and quality of life for low-income populations.

Originality/Value: It utilises a combination of heat-storing materials that enhances the efficiency and reliability of cooking during off-sunshine hours, distinguishing it from other solar cooking technologies.

Author Biographies

M. A. Kumbhalkar, JSPM Narhe Technical Campus, Pune, Maharashtra, India.

Dr. Manoj A. Kumbhalkar is an Associate Professor at the Department of Mechanical Engineering, JSPM Narhe Technical Campus, Pune, Maharashtra, India.

S. A. Choudhari, JSPM Narhe Technical Campus, Pune, Maharashtra, India

Dr. Sumant A. Choudhari is an Associate Professor at the  Department of Civil Engineering, JSPM Narhe Technical Campus, Pune, Maharashtra, India.

M. M. Sardeshmukh, JSPM Narhe Technical Campus, Pune, Maharashtra, India

Prof. Mhalsakant M. Sardeshmukh is a Professor at the Department of Electronics and Telecommunication Engineering, JSPM Narhe Technical Campus, Pune, Maharashtra, India.

D. V. Bhise, JSPM University, Pune, Maharashtra, India

Dr. Dattatraya V. Bhise is an Associate Professor in the  School of Mechanical and Manufacturing Science, JSPM University, Pune, Maharashtra, India.

S. S. Nehe, Samarth College of Engineering and Management, Belhe, Maharashtra, India

Dr. Sandip S. Nehe is an Assistant Professor at the Department of Mechanical Engineering, Samarth College of Engineering and Management, Belhe, Maharashtra, India.

V. R. Doifode

Dr. Vaibhaw R. Doifode is an Assistant Professor at the Department of Electrical Engineering, Yeshwatrao Chavan College of Engineering, Wanadongri, Maharashtra, India.

References

Agarwal, A., & Sarviya, R. M. (2016). An experimental investigation of shell and tube latent heat storage for solar dryer using paraffin wax as heat storage material. Engineering Science and Technology, an International Journal, 19(1), 619–631. https://doi.org/10.1016/J.JESTCH.2015.09.014

Balachandran, S. & Swaminathan, J. (2022). Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems. Energies 2022, Vol. 15, Page 8775, 15(22), 8775. https://doi.org/10.3390/EN15228775

Domanski, R., El-Sebaii, A. A. & Jaworski, M. (1995). Cooking during off-sunshine hours using PCMs as storage media. Energy, 20(7), 607–616. https://doi.org/10.1016/0360-5442(95)00012-6

Gawande, T. K. & Ingole, D. S. (2019). Comparative study of heat storage and transfer system for solar cooking. SN Applied Sciences, 1(12), 1–10. https://doi.org/10.1007/S42452-019-1753-0/TABLES/7

Komolafe, C. A. & Okonkwo, C. E. (2022a). Design, Fabrication, and Thermal Evaluation of a Solar Cooking System Integrated with Tracking Device and Sensible Heat Storage Materials. Frontiers in Energy Research, 10, 821098. https://doi.org/10.3389/FENRG.2022.821098/BIBTEX

Malik, M. S., Iftikhar, N., Wadood, A., Khan, M. O., Asghar, M. U., Khan, S., Khurshaid, T., Kim, K. C., Rehman, Z. & Tauqeer Ul Islam Rizvi, S. (2020). Design and Fabrication of Solar Thermal Energy Storage System Using Potash Alum as a PCM. Energies 2020, Vol. 13, Page 6169, 13(23), 6169. https://doi.org/10.3390/EN13236169

Min Choo, Y., Wei, W. & Wei Wei, C. (2021). Salt hydrates as phase change materials for photovoltaics thermal management. https://doi.org/10.1002/ese3.1007

Missana, W. P., Park, E. & Kivevele, T. T. (2020). Thermal Performance Analysis of Solar Dryer Integrated with Heat Energy Storage System and a Low-Cost Parabolic Solar Dish Concentrator for Food Preservation. Journal of Energy, 2020, 1–10. https://doi.org/10.1155/2020/9205283

Nkhonjera, L., Bello-Ochende, T., John, G. & King’ondu, C. K. (2017). A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage. Renewable and Sustainable Energy Reviews, 75, 157–167. https://doi.org/10.1016/J.RSER.2016.10.059

Nooraya, S., Tawil, M., Mohd, ;, Zainal, Z. & Zainal, M. Z. (2018). View Online  Export Citation CrossMark Energy harvesting using TEG and PV cell for low power application  Energy Harvesting using TEG and PV Cell for Low Power Application. AIP Conf. Proc, 1930, 20041. https://doi.org/10.1063/1.5022935

Pawar, U., Bhole, K. S., Oza, A., Panchal, H., Shah, M. A. & Jaber, M. M. (2023). A case study on the design and development of solar food cooking system with a PCM as a heat storage unit. International Journal of Low-Carbon Technologies, 18, 184–190. https://doi.org/10.1093/IJLCT/CTAD002

Schwarzer, K., & Vieira da Silva, M. E. (2003a). Solar cooking system with or without heat storage for families and institutions. Solar Energy, 75(1), 35–41. https://doi.org/10.1016/S0038-092X(03)00197-X

Xie, S., Wang, H., Wu, Q., Liu, Y., Zhang, Y., Jin, J. & Pei, C. (2019). A study on the thermal performance of solar oven based on phase-change heat storage. Energy Exploration and Exploitation, 37(5), 1487–1501. https://doi.org/10.1177/0144598718795491/asset/images/large/10.1177_0144598718795491-FIG7.JPEG

Downloads

Published

2025-01-09

How to Cite

Kumbhalkar, M. A., Choudhari, S. A. ., Sardeshmukh, M. M. ., Bhise, D. V. ., Nehe, S. S., & Doifode, V. R. (2025). Design of Solar Stove with Heat Storing Material Using PV Cells. AFRICAN JOURNAL OF APPLIED RESEARCH, 11(1), 408–422. https://doi.org/10.26437/ajar.v11i1.856